CiscoForums.it

AIUTO!!

da ieri tento di inserire l'istruzione

ip tacacs source-interface Loopback0

la prende ma non la mette poi in lista sh run

io dovrei ottenere questo risultato

ip classless
ip route 0.0.0.0 0.0.0.0 213.205.16.45
ip tacacs source-interface Loopback0
no ip http server

ma ottengo sempre questo

ip classless
ip route 0.0.0.0 0.0.0.0 213.205.16.45
no ip http server

inoltre non mi accetta

logging queue-limit 100

----------------------------------------------------------
la configurazione totale che devo ottenere è questa

version 12.2
no service pad
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
service password-encryption
!
hostname c1721
!
logging queue-limit 100
logging buffered 4096 debugging
enable secret cisco
!
username cisco password cisco
clock summer-time gmt+1 recurring
!
!
ip subnet-zero
!
!
ip name-server 213.205.36.70
ip name-server 213.205.32.70
!
!
!
!
!
interface Loopback0
ip address 217.133.x.y 255.255.255.252
!
interface FastEthernet0
ip address 82.85.x.y 255.255.255.240
speed auto
!
interface Serial0
ip address negotiated
encapsulation frame-relay IETF
no fair-queue
hold-queue 4096 in
!
interface Serial0.100 point-to-point
no cdp enable
frame-relay interface-dlci 100 ppp Virtual-Template1
!
interface Virtual-Template1
ip unnumbered Loopback0
no keepalive
!
ip classless
ip route 0.0.0.0 0.0.0.0 213.205.16.45
ip tacacs source-interface Loopback0
no ip http server
!
!
!
line con 0
login local
line aux 0
login local
line vty 0 4
login local
!
no scheduler allocate
end

datemi una mano per favore