aiuto configurazione cisco 1721

[voyager259]

Ciao a tutti,
premetto che sono nuovo del forum, e soprattutto di IOS

posto qui di seguito la configurazione del mio router 1721 connesso ad una ADSL alice di telecom,

chiedendovi aiuto perchè molto probabilmente vi è qualcosa che non va , ma non capisco cosa e non riesco a connettermi e navigare.

Building configuration...

Current configuration : 3643 bytes
!
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname PROVA1
!
enable secret 5 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
enable password 7 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
!
username voyager privilege 15 password 7 xxxxxxxxxxxxx
memory-size iomem 15
ip subnet-zero
!
!
ip dhcp excluded-address 192.0.0.1 192.168.0.10
!
ip dhcp pool local
network 192.168.0.0 255.255.255.0
default-router 192.168.0.1
dns-server 212.216.112.112 212.216.172.62
!
ip audit notify log
ip audit po max-events 100
vpdn enable
!
vpdn-group pppoe
request-dialin
protocol pppoe
!
!
!
!
!
!
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 8/35
pppoe-client dial-pool-number 1
!
dsl operating-mode auto
!
interface FastEthernet0
ip address 192.168.0.1 255.255.255.0
ip nat inside
speed auto
!
interface Serial0
no ip address
shutdown
!
interface Dialer1
ip address negotiated
ip mtu 1492
ip nat outside
encapsulation ppp
no ip route-cache
no ip mroute-cache
dialer pool 1
dialer-group 1
ppp authentication chap callin
ppp pap sent-username xxxxxxxxx password 7 xxxxxxxxxxxxxxx
!
ip nat inside source list 1 interface Dialer1 overload
ip nat inside source static udp 192.168.0.8 11111 interface Dialer1 11111
ip nat inside source static udp 192.168.0.8 10201 interface Dialer1 10201
ip nat inside source static udp 192.168.0.8 6257 interface Dialer1 6257
ip nat inside source static tcp 192.168.0.8 6699 interface Dialer1 6699
ip nat inside source static tcp 192.168.0.205 80 interface Dialer1 80
ip nat inside source static tcp 192.168.0.205 21 interface Dialer1 21
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
!
!
access-list 1 permit 192.168.0.0 0.0.0.255
access-list 23 permit 192.168.0.0 0.0.0.255
dialer-list 1 protocol ip permit
line con 0
exec-timeout 120 0
stopbits 1
line aux 0
line vty 0
exec-timeout 120 0
privilege level 15
login local
length 0
transport input telnet
line vty 1 4
exec-timeout 0 0
privilege level 15
password 7 xxxxxxxxxxxxx
login local
length 0
transport input telnet
!
scheduler max-task-time 5000
no scheduler allocate
end

[TheIrish]

ATM0 is down, line protocol is down

Questo certo non è confortante. Controlla se il cavo è collegato bene, controlla che il filtro funzioni bene, se ne hai la possibilità, controlla su un'altra linea...

[mgx]

Uhm....oltre a problemi di livello 2 (ATM down) ci sono anche errori di configurazione per la parte encapsulation.

Iniziamo con il problema di livello 2.
Prova ad attivare i seguenti debug:
Generic ATM:
ATM packets debugging is on
ATM events debugging is on
ATM VC States debugging is on
ATM errors debugging is on

Poi shut / no shut dell'interfaccia ATM.

Cattura i log e pubblicali.

Cattura anche l'output del comando sh diag.

Cheers!

[voyager259]

Ho fatto come mi avete suggerito entrambi,
penso per il problema dell' ATM down di aver risolto nel senso che adesso è up, dopo aver sostituito il cavo ed il filtro, penso proprio fosse quest'ultimo.
Riporto in allegato il nuovo show int e l' sh diag.

Per i problemi di conf cosa c'è che non va?

Grazie mille dell'aiuto
di segutio lo sho int e l'sh diag:

ATM0 is up, line protocol is up
Hardware is DSLSAR (with Alcatel ADSL Module)
MTU 4470 bytes, sub MTU 4470, BW 320 Kbit, DLY 6400 usec,
reliability 255/255, txload 100/255, rxload 107/255
Encapsulation ATM, loopback not set
Encapsulation(s): AAL5 AAL2, PVC mode
23 maximum active VCs, 256 VCs per VP, 0 current VCCs
VC idle disconnect time: 300 seconds
Last input 00:55:43, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 44
Queueing strategy: fifo
Output queue :0/40 (size/max)
5 minute input rate 135000 bits/sec, 36 packets/sec
5 minute output rate 126000 bits/sec, 37 packets/sec
85518 packets input, 24508846 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
96219 packets output, 50693787 bytes, 0 underruns
0 output errors, 0 collisions, 2 interface resets
0 output buffer failures, 0 output buffers swapped out
Dialer1 is up, line protocol is up (spoofing)
Hardware is Unknown
Internet address is 82.xxx.xxx.xxx/xx
MTU 1500 bytes, BW 56 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation PPP, loopback not set
DTR is pulsed for 1 seconds on reset
Interface is bound to Vi1
Last input never, output never, output hang never
Last clearing of "show interface" counters 01:07:46
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/0/16 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 42 kilobits/sec
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
85627 packets input, 20211265 bytes
96366 packets output, 51135550 bytes
Bound to:
Virtual-Access1 is up, line protocol is up
Hardware is Virtual Access interface
MTU 1500 bytes, BW 56 Kbit, DLY 100000 usec,
reliability 255/255, txload 251/255, rxload 241/255
Encapsulation PPP, loopback not set
DTR is pulsed for 5 seconds on reset
Interface is bound to Di1 (Encapsulation PPP)
LCP Open
Listen: CDPCP
Open: IPCP
Last input 00:00:00, output never, output hang never
Last clearing of "show interface" counters 00:55:47
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue :0/40 (size/max)
5 minute input rate 122000 bits/sec, 37 packets/sec
5 minute output rate 129000 bits/sec, 36 packets/sec
85702 packets input, 20224864 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
96429 packets output, 51153312 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
FastEthernet0 is up, line protocol is up
Hardware is PQUICC_FEC, address is 0007.85a2.e902 (bia 0007.85a2.e902)
Internet address is 192.168.0.1/24
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 100Mb/s, 100BaseTX/FX
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue :0/40 (size/max)
5 minute input rate 126000 bits/sec, 39 packets/sec
5 minute output rate 126000 bits/sec, 40 packets/sec
101011 packets input, 50255150 bytes
Received 2801 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog
0 input packets with dribble condition detected
86904 packets output, 21680946 bytes, 0 underruns
3 output errors, 0 collisions, 3 interface resets
0 babbles, 0 late collision, 0 deferred
3 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
Serial0 is administratively down, line protocol is down
Hardware is PowerQUICC Serial
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation HDLC, loopback not set
Keepalive set (10 sec)
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/0/256 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 1158 kilobits/sec
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
DCD=down DSR=down DTR=down RTS=down CTS=down

Virtual-Access1 is up, line protocol is up
Hardware is Virtual Access interface
MTU 1500 bytes, BW 56 Kbit, DLY 100000 usec,
reliability 255/255, txload 251/255, rxload 241/255
Encapsulation PPP, loopback not set
DTR is pulsed for 5 seconds on reset
Interface is bound to Di1 (Encapsulation PPP)
LCP Open
Listen: CDPCP
Open: IPCP
Last input 00:00:01, output never, output hang never
Last clearing of "show interface" counters 00:55:50
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue :0/40 (size/max)
5 minute input rate 122000 bits/sec, 37 packets/sec
5 minute output rate 129000 bits/sec, 36 packets/sec
85780 packets input, 20260420 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
96505 packets output, 51201038 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions

------------------------------------------------------------------------
sh diag:


Slot 0:
C1720 1FE Mainboard Port adapter, 3 ports
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 6.1
PCB Serial Number : xxxxxxxxxxx
Part Number : 73-3201-06
Board Revision : A0
Fab Version : 04
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 00 B2 41 06 01 C1 8B 4A 41 44 30 35 34
0x10: 38 30 38 4E 36 82 49 0C 81 06 42 41 30 02 04 FF
0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

WIC/VIC Slot 0:
Serial 1T
Hardware revision 1.0 Board revision L0
Serial number xxxxxxxxxx Part number 800-01514-01
Test history 0x00 RMA number 00-00-00
Connector type WAN Module
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 02 01 00 01 8C F0 7D 50 05 EA 01 00 00 00 00
0x30: A8 00 00 00 01 09 27 01 FF FF FF FF FF FF FF FF

WIC Slot 1:
Alcatel 20150 ADSL WIC WAN daughter card-Version 4 TLV Cookie Format
Hardware Revision : 2.2
Part Number : 73-4771-07
Board Revision : A0
Deviation Number : 0-0
Fab Version : 05
PCB Serial Number : xxxxxxxxxxx
Unknown Field (type 0103): 00
RMA Number : 0-0-0-0
RMA History : 00

[voyager259]

C'è qualcuno????

[TheIrish]

Mah, comunque il link è up, non riesci comunque a navigare?