AP 1310

[MaiO]

Non riesco a tirare su l'int fe0.

FastEthernet0 is up, line protocol is down
Hardware is PowerPCElvis Ethernet, address is 0015.c660.db18 (bia 0015.c660.db18)
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Full-duplex, Auto Speed, MII
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog
0 input packets with dribble condition detected
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 3 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out

Ho provato a settare i valori senza la negoziazione sia sulla scheda di rete sia sul AP, ho provato con diversi cavi, sia patch sia cross, ho provato su diverse schede di rete. Nada


Qualche suggerimento??

IOS è c1310-k9w7-mx.123-7.JA2


Grazie