Configurare snmp su switch linksys
Inviato: gio 16 set , 2010 4:29 pm
Ciao a tutti.
Ho due switch linksys 24 porte e vorrei abilitare l'snmp in modo che possa poi monitorare le risorse di rete tramite un network monitor (zabbix o nagios).
Ho notato che la cli è cisco like 
Io non sono pratico... come abilito l'snmp per fare quello che chiedo?
Grazie 1000
Ho due switch linksys 24 porte e vorrei abilitare l'snmp in modo che possa poi monitorare le risorse di rete tramite un network monitor (zabbix o nagios).
Codice: Seleziona tutto
SRW2024# configure
SRW2024(config)#
aaa Authentication, Authorization and Accounting is used
to manage user access to the system
arp Set a static ARP entry
bridge Global Bridge table configuration commands
class-map This command create class map and enter class map
configuration mode.
Use no form in order to delete the class.
clock Manage the system clock
crypto Global cryptographic features configuration subcommands
do execute an EXEC-level command
dot1x Global Configuration Commands for 802.1x
enable Modify enable password parameters.
end Exit from configure mode
exit Exit from configure mode
file-system File system configuration command
gvrp Global GVRP configuration commands
help Description of the interactive help system
hostname Set system's network name
interface Select an interface to configure
ip IP configuration
lacp Global IEEE 802.3 link aggregation commands
line To identify a specific line for configuration
lldp Configure LLDP protocol
logging Configure message logging facilities.
mac MAC access lists commands
management IP management
no Negate command
policy-map This command create policy map and enter policy map
configuration mode. Use no form to delete the policy
map.
port switch ports configuration
priority-queue Set priority queue parameters
qos Enable/Disable QoS on the device and enter the QoS
mode (advance/basic/service).
radius-server Modify RADIUS parameters
rmon Remote Monitoring (RMON) configuration subcommand
service Service commands.
snmp-server SNMP and system commands.
sntp Global Simple Network Time Protocol (SNTP)
configuration subcommands
spanning-tree Configure Spanning Tree Subsystem
tacacs-server TACACS server command
username Establish User Name Authentication.
vlan Vlan commands
wrr-queue Configure queue drop mechanism on egress port.
SRW2024(config)#
Io non sono pratico... come abilito l'snmp per fare quello che chiedo?
Grazie 1000
