aiuto config per navigare !!! ho fatto un casino
Inviato: mer 01 set , 2010 10:12 am
salve
ho modificato la config del router ed adesso mi succede una cosa strana. internet funziona, leggo le mail, funziona msn, ma la navigazione nei vari sito non ne vuole sapere di funzionare..... anzi mi funziona solo google.it il pc usa direttmente i dns pubblici.. quelli di google e alice ma non va...
ecco la conf:
la config è incasinata ma non riesco a trovae l'errore 
help me
grazie1000
ho modificato la config del router ed adesso mi succede una cosa strana. internet funziona, leggo le mail, funziona msn, ma la navigazione nei vari sito non ne vuole sapere di funzionare..... anzi mi funziona solo google.it il pc usa direttmente i dns pubblici.. quelli di google e alice ma non va...
ecco la conf:
Codice: Seleziona tutto
Building configuration...
Current configuration : 4952 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname router
!
boot-start-marker
boot-end-marker
!
no logging buffered
enable password 7 150104191022222A7821653A
!
aaa new-model
!
!
!
aaa session-id common
!
resource policy
!
no ip source-route
no ip gratuitous-arps
!
!
ip cef
no ip dhcp use vrf connected
!
ip dhcp pool negzio
!
!
no ip bootp server
ip name-server 151.99.125.1
!
!
!
username hwstore privilege 15 secret 5 $1$mzfI$zYbrcw99qfj5F5CIO2WeK/
username router
username remoto password 7 050D5617355E1E1D
!
!
class-map match-any FILTRO-P2P
match protocol gnutella
match protocol napster
match protocol kazaa2
match protocol fasttrack
match protocol edonkey
match protocol bittorrent
!
!
!
!
!
!
interface FastEthernet0
ip address 192.168.7.1 255.255.255.0
ip nat inside
ip virtual-reassembly
speed auto
full-duplex
!
interface FastEthernet0.1
description videosorveglianza
encapsulation dot1Q 5
ip address 192.168.4.1 255.255.255.0
ip nat inside
ip virtual-reassembly
no snmp trap link-status
no cdp enable
!
interface FastEthernet0.2
description server
encapsulation dot1Q 7
ip address 192.168.3.1 255.255.255.0
ip nat inside
ip virtual-reassembly
no snmp trap link-status
no cdp enable
!
interface FastEthernet0.3
description fonia
encapsulation dot1Q 10
ip address 192.168.8.1 255.255.255.0
ip nat inside
ip virtual-reassembly
no snmp trap link-status
no cdp enable
!
interface FastEthernet0.4
description negozio
encapsulation dot1Q 8
ip address 192.168.5.1 255.255.255.0
ip nat inside
ip virtual-reassembly
no snmp trap link-status
no cdp enable
!
interface FastEthernet0.5
description datiwifi
encapsulation dot1Q 6
ip address 192.168.6.1 255.255.255.0
no snmp trap link-status
no cdp enable
!
interface FastEthernet0.6
description nas
encapsulation dot1Q 11
ip address 192.168.9.1 255.255.255.0
no snmp trap link-status
no cdp enable
!
interface BRI0
no ip address
encapsulation hdlc
shutdown
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
!
interface FastEthernet5
!
interface FastEthernet6
!
interface FastEthernet7
!
interface FastEthernet8
!
interface ATM0
description alice business 20 mbps
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0.1 point-to-point
ip nat outside
ip virtual-reassembly
no snmp trap link-status
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
!
interface Vlan1
ip address 192.168.1.100 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip virtual-reassembly
ip route-cache flow
!
interface Dialer1
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication chap pap callin
ppp chap hostname aliceadsl
ppp chap password 7 070E2D454D0C1801041E
ppp pap sent-username aliceadsl password 7 104F05100612130F1F08
!
ip route 0.0.0.0 0.0.0.0 Dialer1
!
!
ip http server
ip http access-class 23
no ip http secure-server
ip nat inside source list 1 interface Dialer1 overload
ip nat inside source list 102 interface Dialer1 overload
ip nat inside source static tcp 192.168.8.250 8885 interface Dialer0 8885
ip nat inside source static tcp 192.168.7.1 23 interface Dialer0 23
ip nat inside source static tcp 192.168.3.60 80 interface Dialer0 80
ip nat inside source static tcp 192.168.7.4 3389 interface Dialer0 3389
ip nat inside source static tcp 192.168.1.10 4662 interface Dialer0 4662
!
no logging trap
access-list 1 permit 192.168.0.0 0.0.0.255
access-list 1 permit any
access-list 100 permit ip any any
dialer-list 1 protocol ip permit
no cdp run
!
!
!
!
!
!
control-plane
!
banner login ^C
-----------------------------------------------------------------------
Cisco Router and Security Device Manager (SDM) is installed on this device.
This feature requires the one-time use of the username "cisco"
with the password "cisco". The default username and password have a privilege level of 15.
Please change these publicly known initial credentials using SDM or the IOS CLI.
Here are the Cisco IOS commands.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want to use.
For more information about SDM please follow the instructions in the QUICK START
GUIDE for your router or go to http://www.cisco.com/go/sdm
-----------------------------------------------------------------------
^C
!
line con 0
line aux 0
line vty 0 4
password 7 0317541E120728421E1B491D
transport input telnet ssh
line vty 5 15
access-class 23 in
privilege level 15
transport input telnet ssh
!
!
webvpn context Default_context
ssl authenticate verify all
!
no inservice
!
grazie1000
