CiscoForums.it

Salve,

questo e' il log di un cisco 803 che non si riesce a collegare in multilink:

*Mar 1 01:04:47: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0, TEI 99 changed to up.
*Mar 1 01:04:49: %LINK-3-UPDOWN: Interface BRI0:2, changed state to up
*Mar 1 01:04:49: %DIALER-6-BIND: Interface BR0:2 bound to profile Di1
*Mar 1 01:04:49: BR0:2 PPP: Phase is DOWN, Setup
*Mar 1 01:04:49: BR0:2 PPP: Using dialer call direction
*Mar 1 01:04:49: BR0:2 PPP: Treating
*Mar 1 01:04:49: BR0:2 PPP: Phase is ESTABLISHING, Active Open
*Mar 1 01:04:49: BR0:2 PPP: Authorization required
*Mar 1 01:04:49: BR0:2 PPP: No remote authentication for call-out
*Mar 1 01:04:49: BR0:2 LCP: O CONFREQ [Closed] id 1 len 24
*Mar 1 01:04:49: BR0:2 LCP: MagicNumber 0xB0692608 (0x0506B0692608)
*Mar 1 01:04:49: BR0:2 LCP: MRRU 1524 (0x110405F4)
*Mar 1 01:04:49: BR0:2 LCP: EndpointDisc 1 telecom (0x130A0174656C65636F6D)
*Mar 1 01:04:49: BR0:2 LCP: I CONFREQ [REQsent] id 1 len 26
*Mar 1 01:04:49: BR0:2 LCP: MRU 1524 (0x010405F4)
*Mar 1 01:04:49: BR0:2 LCP: AuthProto CHAP (0x0305C22305)
*Mar 1 01:04:49: BR0:2 LCP: MRRU 1524 (.0x110405F4)
*Mar 1 01:04:49: BR0:2 LCP: EndpointDisc 1 stack1 (0x130901737461636B31)
*Mar 1 01:04:49: BR0:2 LCP: O CONFACK [REQsent] id 1 len 26
*Mar 1 01:04:49: BR0:2 LCP: MRU 1524 (0x010405F4)
*Mar 1 01:04:49: BR0:2 LCP: AuthProto CHAP (0x0305C22305)
*Mar 1 01:04:49: BR0:2 LCP: MRRU 1524 (0x110405F4)
*Mar 1 01:04:49: BR0:2 LCP: EndpointDisc 1 stack1 (0x130901737461636B31)
*Mar 1 01:04:49: BR0:2 LCP: I CONFACK [ACKsent] id 1 len 24
*Mar 1 01:04:49: BR0:2 LCP: MagicNumber 0xB0692608 (0x0506B0692608)
*Mar 1 01:04:49: BR0:2 LCP: MRRU 1524 (0x110405F4)
*Mar 1 01:04:49: BR0:2 LCP: EndpointDisc 1 telecom (0x130A0174656C65636F6D)
*Mar 1 01:04:49: BR0:2 LCP: State is Open
*Mar 1 01:04:49: BR0:2 PPP: No authorization without authentication
*Mar 1 01:04:49: BR0:2 PPP: Phase is AUTHENTICATING, by th
*Mar 1 01:04:49: BR0:2 CHAP: I CHALLENGE id 1 len 28 from "apx-pe2"
*Mar 1 01:04:49: BR0:2 CHAP: Using hostname from interface CHAP
*Mar 1 01:04:49: BR0:2 CHAP: Using password from interface CHAP
*Mar 1 01:04:49: BR0:2 CHAP: O RESPONSE id 1 len 28 from "telecom"
*Mar 1 01:04:50: %ISDN-6-CONNECT: Interface BRI0:2 is now connected to 7010187187 stack1
*Mar 1 01:04:50: %LINK-3-UPDOWN: Interface BRI0:2, changed state to down
*Mar 1 01:04:50: BR0:2 PPP: Phase is ESTABLISHING, renegotiate LCP
*Mar 1 01:04:50: BR0:2 PPP: Authorization required
*Mar 1 01:04:50: BR0:2 PPP: No remote authentication for call-out
*Mar 1 01:04:50: BR0:2 LCP: O CONFREQ [Closed] id 2 len 10
*Mar 1 01:04:50: BR0:2 LCP: MagicNumber 0xB069278D (0x0506B069278D)
*Mar 1 01:04:50: BR0:2 PPP: Sending Acct Event[Down] id[9]
*Mar 1 01:04:50: BR0:2 LCP: State is Closed
*Mar 1 01:04:50: BR0:2 PPP: Phase is DOWN
*Mar 1 01:04:50: %DIALER-6-UNBIND: Interface BR0:2 unbound from profile Di1
*Mar 1 01:04:53: %LINK-3-UPDOWN: Interf
*Mar 1 01:04:53: %DIALER-6-BIND: Interface BR0:1 bound to profile Di1
*Mar 1 01:04:53: BR0:1 PPP: Phase is DOWN, Setup
*Mar 1 01:04:53: BR0:1 PPP: Using dialer call direction
*Mar 1 01:04:53: BR0:1 PPP: Treating connection as a callout
*Mar 1 01:04:53: BR0:1 PPP: Phase is ESTABLISHING, Active Open
*Mar 1 01:04:53: BR0:1 PPP: Authorization required
*Mar 1 01:04:53: BR0:1 PPP: No remote authentication for call-out
*Mar 1 01:04:53: BR0:1 LCP: O CONFREQ [Closed] id 1 len 24
*Mar 1 01:04:53: BR0:1 LCP: MagicNumber 0xB06933B3 (0x0506B06933B3)
*Mar 1 01:04:53: BR0:1 LCP: MRRU 1524 (0x110405F4)
*Mar 1 01:04:53: BR0:1 LCP: EndpointDisc 1 telecom (0x130A0174656C65636F6D)
*Mar 1 01:04:53: BR0:1 LCP: I CONFREQ [REQsent] id 1 len 26
*Mar 1 01:04:53: BR0:1 LCP: MRU 1524 (0x010405F4)
*Mar 1 01:04:53: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
*Mar 1 01:04:53: BR0:1 LCP: MRRU 1524 (0x110405F4)
*Mar 1 01:04:53: BR0:1 LCP: EndpointDisc 1 stack1 (0x130901737461636B31)
*Mar 1 01:04:53: BR0:1 LCP: O CONFACK [REQsent] id 1 len 26
*Mar 1 01:04:53: BR0:1 LCP: MRU 1524 (0x010405F4)
*Mar 1 01:04:53: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
*Mar 1 01:04:53: BR0:1 LCP: MRRU 1524 (0x110405F4)
*Mar 1 01:04:53: BR0:1 LCP: EndpointDisc 1 stack1 (0x130901737461636B31)
*Mar 1 01:04:53: BR0:1 LCP: I CONFACK [ACKsent] id 1 len 24
*Mar 1 01:04:53: BR0:1 LCP: MagicNumber 0xB06933B3 (0x0506B06933B3)
*Mar 1 01:04:53: BR0:1 LCP:
*Mar 1 01:04:53: BR0:1 LCP: EndpointDisc 1 telecom (0x130A0174656C65636F6D)
*Mar 1 01:04:53: BR0:1 LCP: State is Open
*Mar 1 01:04:53: BR0:1 PPP: No authorization without authentication
*Mar 1 01:04:53: BR0:1 PPP: Phase is AUTHENTICATING, by the peer
*Mar 1 01:04:53: BR0:1 CHAP: I CHALLENGE id 1 len 28 from "apx-pe1"
*Mar 1 01:04:53: BR0:1 CHAP: Using hostname from interface CHAP
*Mar 1 01:04:53: BR0:1 CHAP: Using password from interface CHAP
*Mar 1 01:04:53: BR0:1 CHAP: O RESPONSE id 1 len 28 from "
*Mar 1 01:04:53: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 7010187187 stack1
*Mar 1 01:04:53: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
*Mar 1 01:04:53: BR0:1 PPP: Phase is ESTABLISHING, renegotiate LCP
*Mar 1 01:04:53: BR0:1 PPP: Authorization required
*Mar 1 01:04:53: BR0:1 PPP: No remote authentication for call-out
*Mar 1 01:04:53: BR0:1 LCP: O CONFREQ [Closed] id 2 len 10
*Mar 1 01:04:53: BR0:1 LCP: MagicNumber 0xB0693538 (0x0506B0693538)
*Mar 1 01:04:53: BR0:1 PPP: Sen
*Mar 1 01:04:53: BR0:1 LCP: State is Closed
*Mar 1 01:04:53: BR0:1 PPP: Phase is DOWN
*Mar 1 01:04:53: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile Di1
*Mar 1 01:04:57: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
*Mar 1 01:04:57: %DIALER-6-BIND: Interface BR0:1 bound to profile Di1
*Mar 1 01:04:57: BR0:1 PPP: Phase is DOWN, Setup
*Mar 1 01:04:57: BR0:1 PPP: Using dialer call direction
*Mar 1 01:04:57: BR0:1 PPP: Treating connection as a callout
*Mar 1 01:04:57: BR0:1 PPP: Phase is E
*Mar 1 01:04:57: BR0:1 PPP: Authorization required
*Mar 1 01:04:57: BR0:1 PPP: No remote authentication for call-out
*Mar 1 01:04:57: BR0:1 LCP: O CONFREQ [Closed] id 1 len 24
*Mar 1 01:04:57: BR0:1 LCP: MagicNumber 0xB0694322 (0x0506B0694322)
*Mar 1 01:04:57: BR0:1 LCP: MRRU 1524 (0x110405F4)
*Mar 1 01:04:57: BR0:1 LCP: EndpointDisc 1 telecom (0x130A0174656C65636F6D)
*Mar 1 01:04:57: BR0:1 LCP: I CONFREQ [REQsent] id 1 len 26
*Mar 1 01:04:57: BR0:1 LCP: MRU 1524 (0x010405F4)
*Mar 1 01:04:57: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
*Mar 1 01:04:57: BR0:1 LCP: MRRU 1524 (0x110405F4)
*Mar 1 01:04:57: BR0:1 LCP: EndpointDisc 1 stack1 (0x130901737461636B31)
*Mar 1 01:04:57: BR0:1 LCP: O CONFACK [REQsent] id 1 len 26
*Mar 1 01:04:57: BR0:1 LCP: MRU 1524 (0x010405F4)
*Mar 1 01:04:57: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
*Mar 1 01:04:57: BR0:1 LCP: MRRU 1524 (0x110405F4)
*Mar 1 01:04:57: BR0:1 LCP: EndpointDisc 1 stack1 (0x130901737461636B31)
*Mar 1 01:04:57: BR0:1 LCP: EndpointDisc 1 stack1 (0x130901737461636B31)
*Mar 1 01:04:57: BR0:1 LCP: MagicNumber 0xB0694322 (0x0506B0694322)
*Mar 1 01:04:57: BR0:1 LCP: MRRU 1524 (0x110405F4)
*Mar 1 01:04:57: BR0:1 LCP: EndpointDisc 1 telecom (0x130A0174656C65636F6D)
*Mar 1 01:04:57: BR0:1 LCP: State is Open
*Mar 1 01:04:57: BR0:1 PPP: No authorization without authentication
*Mar 1 01:04:57: BR0:1 PPP: Phase is AUTHENTICATING, by the peer
*Mar 1 01:04:57: BR0:1 CHAP: I CHALLENGE id 1 len 28 from "apx-pe2"
*Mar 1 01:04:57: BR0:1 CHAP: Using hostname from interface CHAP
*Mar 1 01:04:57: BR0:1 CHAP: Using password from interface CHAP
*Mar 1 01:04:57: BR0:1 CHAP: O RESPONSE id 1 len 28 from "telecom"
*Mar 1 01:04:57: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 7010187187 stack1
*Mar 1 01:04:57: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
*Mar 1 01:04:57: BR0:1 PPP: Phase is ESTABLISHING, renegotiate LCP
*Mar 1 01:04:57: BR0:1 PPP: Authorization required
*Mar 1 01:04:57: BR0:1 PPP: No remote authentication for call-out
*Mar 1 01:04:57: BR0:1 LCP: O CONFREQ [Closed] id 2 len 10
*Mar 1 01:04:57: BR0:1 LCP: MagicNumber 0xB06944B7 (0x0506B06944B7)
*Mar 1 01:04:57: BR0:1 PPP: Sending Acct Event[Down] id
*Mar 1 01:04:57: BR0:1 LCP: State is Closed
*Mar 1 01:04:57: BR0:1 PPP: Phase is DOWN
*Mar 1 01:04:57: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile Di1
*Mar 1 01:05:10: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0, TEI 99 changed to down

grazie

Nel tuo post precedente dicevi di essere in grado di connetterti correttamente a 64k(no multilink) e ad uscire, però quando provi il multilink ti si connette un solo canale e l'altro tenta all'infinito di collegarsi(inutilmente). In questa situazione (cioè con un solo canale su mentre l'altro tenta continuamente la connessione), riesci ad uscire o è come se non fossi proprio connesso?

ciao

esattamente succede questo:

- senza multilink si collega al volo e funziona regolarmente;
- se imposto ppp multilink al volo, immediatamente il router scollega il primo canale, tenta di collegarsi con entrambi ma non riesce;
- quindi nulla e' collegato;
- se tolgo il ppp multilink immediatamente si ricollega con i 64K ed esco tranquillamente.

Stessa cosa se metto ppp multilink e rebooto il router.

Ripeto che con un ta su un winxp mi collego tranquillamente a 128, posso sospendere a 64 e ritornare a 128 senza alcun problema...

Grazie mille per l'aiuto, sto uscendo di senno con questo problema che devo risolvere assolutamente.