Pagina 1 di 1

Firewall e ip dinamico

Inviato: sab 19 nov , 2005 6:20 pm
da Max
Ciao a tutti !
Ho un Cisco 1721 che al momento mi permette di connettere la mia lan verso Internet, nattando il traffico verso l'esterno etc.

Vorrei poter aggiungere un firewall e permettere di gestire tutto, policy sul traffico e relativi nat tramite il firewall stesso, delegando il router ad una funzione più simile ad un modem, so che utilizzando il bridging questo dovrebbe essere possibile, ma non l'ho mai fatto ho fatto dei tentativi ma senza esito.

Può qualcuno di voi darmi un aiuto gliene sarei grato.

Allego anche la mia attuale conf.

Grazie anticipatamente.

MAX

Inviato: dom 20 nov , 2005 12:39 am
da Step
poi che tipo di ios hai?

Inviato: dom 20 nov , 2005 9:37 pm
da Max
Di seguito uno sh ver
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-Y7-M), Version 12.2(11)T6, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Fri 14-Feb-03 14:38 by ccai
Image text-base: 0x80008124, data-base: 0x808DD84C

ROM: System Bootstrap, Version 12.2(7r)XM1, RELEASE SOFTWARE (fc1)

RouterADSL uptime is 1 day, 2 hours, 9 minutes
System returned to ROM by reload
System image file is "flash:c1700-y7-mz.122-11.T6.bin"

cisco 1721 (MPC860P) processor (revision 0x100) with 29492K/3276K bytes of memory.
Processor board ID FOC0711066X (3289648859), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
1 FastEthernet/IEEE 802.3 interface(s)
1 ISDN Basic Rate interface(s)
1 ATM network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Grazie