CiscoForums.it

Codice: Seleziona tutto

ip ddns update method mymethod
HTTP
  add http://utente:[email protected]/nic/update?system=dyndns&hostname=misito.homelinux.com&myip=87.87.87.87
interval maximum 10 0 0 0
interval minimum 0 1 0 0

interface Dialer0
ip ddns update hostname misito.homelinux.com
ip ddns update mymethod[code]
l'ip che bisogna specificare è quello pubblico ? ma se ho un'adsl consumer, quindi cambia ad ogni restart, quale ip devo mettere?
grazie mille

Codice: Seleziona tutto

Using 2948 out of 131072 bytes
!
! Last configuration change at 18:55:14 GMT Sun Feb 21 2010
! NVRAM config last updated at 19:02:00 GMT Sun Feb 21 2010
!
version 12.4
no service pad
service timestamps debug uptime
service timestamps log datetime
service password-encryption
!
hostname bem827h
!
boot-start-marker
boot-end-marker
!
no logging on
enable secret 5 111111111111111
enable password 7 111111111111111
!
no aaa new-model
clock timezone GMT 1
no ip dhcp use vrf connected
no ip dhcp conflict logging
!
ip dhcp pool CLIENT
   import all
   network 192.168.0.0 255.255.255.0
   default-router 192.168.0.1
   dns-server 151.99.125.2
   lease infinite
!
ip dhcp pool STATIC
   host 192.168.0.10 255.255.255.0
   hardware-address e0cb.4e2c.9f11
   client-name bemsrv
   default-router 192.168.0.1
   dns-server 151.99.125.2
   lease infinite
!
!
ip name-server 151.99.125.2
ip name-server 212.216.112.112
ip ddns update method 1ddns
 HTTP
  add http://user:[email protected]/nic/update?system=dyndns&hostname=miosito.homelinux.com&myip=87.87.87.87
 interval maximum 0 0 5 0
!
ip ddns update method 2ddns
 HTTP
  add http://user:[email protected]/nic/update?system=dyndns&hostname=miosito2.homelinux.com&myip=87.87.87.87
 interval maximum 0 0 1 0
!
!
!
ip tcp mss 1453
!
!
interface Ethernet0
 ip address 192.168.0.1 255.255.255.0
 ip nat inside
 ip virtual-reassembly
 hold-queue 100 out
!
interface ATM0
 no ip address
 no atm ilmi-keepalive
 dsl operating-mode auto
 hold-queue 244 in
 pvc 8/35
  encapsulation aal5snap
  protocol ppp dialer
  dialer pool-member 1
 !
!
interface Dialer0
 ip ddns update hostname miosito.homelinux.com
 ip ddns update 1ddns
 ip ddns update 2ddns
 ip address negotiated
 ip nat outside
 ip virtual-reassembly
 encapsulation ppp
 ip tcp adjust-mss 1453
 dialer pool 1
 ppp authentication chap callin
 ppp pap sent-username aliceadsl password 7 111111111111111
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer0
no ip http server
!
ip nat translation timeout 420
ip nat translation tcp-timeout 120
ip nat translation pptp-timeout 420
ip nat translation udp-timeout 120
ip nat translation finrst-timeout 300
ip nat translation syn-timeout 120
ip nat translation dns-timeout 300
ip nat translation icmp-timeout 120
ip nat translation max-entries 5000
ip nat inside source list 1 interface Dialer0 overload
ip nat inside source static tcp 192.168.0.10 22 interface Dialer0 22
ip nat inside source static tcp 192.168.0.10 80 interface Dialer0 80
!
logging 192.168.0.10
access-list 1 permit 192.168.0.0 0.0.0.255
snmp-server community catchme RO
snmp-server trap-source Ethernet0
snmp-server enable traps tty
snmp-server host 192.168.0.10 catchme
!
!
control-plane
!
!
line con 0
 exec-timeout 120 0
 stopbits 1
line vty 0 4
 access-class 23 in
 exec-timeout 120 0
 password 7 111111111111111
 login
 length 0
!
scheduler max-task-time 5000
sntp logging
sntp server 193.204.114.232
end

Codice: Seleziona tutto

enable
configure terminal
ip ddns update method 1ddns
interval minimum 0 0 3 0
interval maximum 0 0 13 0
no ddns
no internal
http
add http://utente:[email protected]/nic/update?system=dyndns&hostname=miosito.dyndns.com&myip=87.87.87.87
exit
exit
interface Dialer 0
ip ddns update hostname miosito.dyndns.com
ip ddns update 1ddns
exit
write
copy run start

Codice: Seleziona tutto

add http://user:[email protected]/nic/update?system=dyndns&hostname=miosito2.homelinux.com