Problema con VLANs su bridge wireless

[jotfco]

Salve,

ho configurato due aironet 1310 per realizzare un bridge radio per collegare un sito remoto.
Il sito centrale è collegato tramite fibra ottica al core switch con un trunk con VLAN nativa 1.
Ho configurato l'interfaccia f0/24 in trunk (connessa la 1310) specificando la VLAN 1 come nativa ed allowed vlan quelle che devo trasportare sul link radio (1,10,101,201).
Sul root bridge ho configurato le sub interfaces come segue:

dot11 ssid bridge
vlan 1
authentication open
infrastructure-ssid
!
interface Dot11Radio0
no ip address
no ip route-cache
!
ssid bridge
!
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
channel 2462
station-role root
distance 1
!
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
!
interface Dot11Radio0.2
encapsulation dot1Q 2
no ip route-cache
bridge-group 2
bridge-group 2 subscriber-loop-control
bridge-group 2 block-unknown-source
no bridge-group 2 source-learning
no bridge-group 2 unicast-flooding
bridge-group 2 spanning-disabled
!
interface Dot11Radio0.10
encapsulation dot1Q 10
no ip route-cache
!
interface Dot11Radio0.101
encapsulation dot1Q 101
no ip route-cache
bridge-group 101
bridge-group 101 subscriber-loop-control
bridge-group 101 block-unknown-source
no bridge-group 101 source-learning
no bridge-group 101 unicast-flooding
bridge-group 101 spanning-disabled
!
interface Dot11Radio0.201
encapsulation dot1Q 201
no ip route-cache
bridge-group 201
bridge-group 201 subscriber-loop-control
bridge-group 201 block-unknown-source
no bridge-group 201 source-learning
no bridge-group 201 unicast-flooding
bridge-group 201 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
hold-queue 160 in
!
interface FastEthernet0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
!
interface FastEthernet0.2
encapsulation dot1Q 2
no ip route-cache
bridge-group 2
no bridge-group 2 source-learning
bridge-group 2 spanning-disabled
!
interface FastEthernet0.10
encapsulation dot1Q 10
no ip route-cache
!
interface FastEthernet0.101
encapsulation dot1Q 101
no ip route-cache
bridge-group 101
no bridge-group 101 source-learning
bridge-group 101 spanning-disabled
!
interface FastEthernet0.201
encapsulation dot1Q 201
no ip route-cache
bridge-group 201
no bridge-group 201 source-learning
bridge-group 201 spanning-disabled
!
interface BVI1
ip address 10.116.162.181 255.255.255.224
no ip route-cache
!

Il link radio con il NON ROOT bridge funziona ma non riesco a pingare dallo switch il root bridge che è direttamente connesso e di conseguenza sul link radio le VLAN non passano .

[cat 3560]---LAN Trunk---ROOT AP>>>>Radio>>>>>NON ROOT AP---LAN TRUNK---[cat 3560]