DHCP su Cisco 1130AG

[alessandrobl]

Ciao a tutti,

Ho un piccolo problema con un 1130AG.
Ho configurato il 1130 come DHCP dandogli al possibilità di assegnare solo 4 indirizzi IP, quello che succede è che in realtà ne assegna solo 2 tenendo sempre impegnati gli altri.

l'ip del 1130 è x.x.x.250 e dovrebbe assegnare in dhcp il 251, 252, 253, 254
mentre assegna sempre e soltanto il 253 e 254.
Spero di essere stato coinciso e chiaro ...
Avete suggerimenti per sbloccare la situazione?

[slowped]

Sono tra gli ultimi arrivati sul forum, ma credo che se postassi la config del router sarebbe meglio.

[alessandrobl]

Grazie per il consiglio! Speravo che fosse un problema noto...

Codice: Seleziona tutto

!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname apXXXX
!
!
aaa new-model
!
!
aaa authentication login default local
aaa authorization exec default local 
!
aaa session-id common
clock timezone +0100 1
ip domain name XXXXXwifi
ip name-server xxx.xxx.xxx.50
ip name-server xxx.xxx.xxx.53
ip name-server 8.8.8.8
no ip dhcp use vrf connected
no ip dhcp conflict logging
ip dhcp excluded-address xxx.xxx.xxx.1 xxx.xxx.xxx.249
!
ip dhcp pool guestUser
   network xxx.xxx.xxx.0 255.255.255.0
   default-router xxx.xxx.xxx.203 
   dns-server xxx.xxx.xxx.50 
   lease 0 0 1
!
!
!
dot11 ssid only_guest
   authentication open 
   authentication key-management wpa
   guest-mode
   wpa-psk ascii 7 0120030F545E5700325C471D1C
!
dot11 network-map
power inline negotiation prestandard source
!
!
username administrator privilege 15 password 7 32428348089809871F
!
bridge irb
!
!
interface Dot11Radio0
 no ip address
 no ip route-cache
 !
 encryption mode ciphers aes-ccm 
 !
 ssid only_guest
 !
 speed  basic-1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0
 station-role root
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
 bridge-group 1 spanning-disabled
!
interface Dot11Radio1
 no ip address
 no ip route-cache
 !
 encryption mode ciphers aes-ccm 
 !
 ssid only_guest
 !
 no dfs band block
 speed  basic-6.0 basic-9.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0
 channel dfs
 station-role root
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
 bridge-group 1 spanning-disabled
!
interface FastEthernet0
 no ip address
 no ip route-cache
 duplex auto
 speed auto
 bridge-group 1
 no bridge-group 1 source-learning
 bridge-group 1 spanning-disabled
!
interface BVI1
 ip address xxx.xxx.xxx.250 xxx.xxx.xxx.0
 no ip route-cache
!
ip default-gateway xxx.xxx.xxx.103
ip http server
ip http authentication aaa
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
radius-server local
!
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
!
end