Wake on Lan da internet 837-4v

[zorro77]

Salve a tutti
ho un 837 con IOS Version 12.2(13)ZH4, flash:c837-k9o3y6-mz.122-13.ZH4.bin, come devo fare per attivare tale servizio, in modo da far arrivare i pacchetti magic su un pc specifico?
La mia attuale configurazione è la seguente

Cisco837#s conf
Using 2218 out of 131072 bytes
!
! Last configuration change at 09:57:59 CET Sat Jun 14 2008
! NVRAM config last updated at 09:58:04 CET Sat Jun 14 2008
!
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Cisco837
!
logging queue-limit 100
enable secret 5 XXXXXXX
enable password XXXXXXXXX
!
clock timezone CET 1
clock summer-time CET recurring
ip subnet-zero
!
!
ip audit notify log
ip audit po max-events 100
no ftp-server write-enable
!
!
!
!
!
!
!
interface Ethernet0
ip address 192.168.1.254 255.255.255.0
ip nat inside
no ip route-cache
no ip mroute-cache
hold-queue 100 out
!
interface ATM0
no ip address
ip nat outside
no ip route-cache
no ip mroute-cache
atm vc-per-vp 64
no atm ilmi-keepalive
pvc 0/16 ilmi
!
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
dsl operating-mode auto
dsl power-cutback 1
hold-queue 224 in
!
interface Dialer0
ip address negotiated
no ip proxy-arp
ip nat outside
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication pap callin
ppp pap sent-username XXXXXXXXXX password 0 XXXXXXXX
!
ip nat inside source list 100 interface Dialer0 overload
ip nat inside source static tcp 192.168.0.30 65535 interface Dialer0 65535
ip nat inside source static udp 192.168.0.30 2304 interface Dialer0 2304
ip nat inside source static tcp 192.168.0.101 7 interface Dialer0 7
ip nat inside source static tcp 192.168.0.30 21 interface Dialer0 21
ip nat inside source static tcp 192.168.0.30 6699 interface Dialer0 6699
ip nat inside source static udp 192.168.0.30 6257 interface Dialer0 6257
ip nat inside source static tcp 192.168.0.30 4666 interface Dialer0 4666
ip nat inside source static udp 192.168.0.30 4676 interface Dialer0 4676
ip nat inside source static tcp 192.168.0.101 80 interface Dialer0 80
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
no ip http server
no ip http secure-server
!
access-list 100 permit ip any any
dialer-list 1 protocol ip permit
!
line con 0
no modem enable
stopbits 1
line aux 0
stopbits 1
line vty 0 4
password XXXX
login
!
scheduler max-task-time 5000
sntp server 193.204.114.232

Accetto anche ulteriori consigli per la configurazione in generale e per configurare un dynamic dns con no-ip

Grazie in anticipo a tutti

[zorro77]

Risolto

APro nuovo post per altro problema

[Wizard]

X curiosità, come hai risolto?

[zorro77]

ip directed-broadcast sul'ethernet0