sono di nuovo alle prese con il mio 827 che sto cercando di imparare e configurare nel tempo libero.ho reimpostato le impostazioni iniziali bypassando il file di conf e dettando il nuovo set-up.
ho trovato una configurazione per la connessione ad Internet domestica ed ho cercato di applicarla ma non riesco ad uscire su Internet.
vi posto la run conf sperando che contenga info sufficienti per qualche consiglio gentile..
Current configuration : 1731 bytes
!
version 12.1
no service single-slot-reload-enable
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname router-adsl
!
logging rate-limit console 10 except errors
enable secret 5
enable password
!
ip subnet-zero
no ip routing
no ip finger
ip tcp mss 1452
ip name-server 195.14.96.135
!
ip dhcp pool lan
network 192.168.1.0 255.255.255.0
!
no ip dhcp-client network-discovery
!
!
!
interface Ethernet0
ip address 192.168.0.1 255.255.255.0
ip nat inside
no ip route-cache
ip tcp adjust-mss 1452
no ip mroute-cache
!
interface ATM0
no ip address
no ip route-cache
no ip mroute-cache
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
bundle-enable
dsl operating-mode auto
hold-queue 224 in
!
interface Dialer0
description lan
ip address negotiated
ip nat outside
encapsulation ppp
dialer pool 1
ppp chap hostname router-adsl
ppp chap password
ppp pap sent-username router-adsl password
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
no ip http server
!
ip nat translation timeout 420
ip nat translation tcp-timeout 120
ip nat translation pptp-timeout 420
ip nat translation udp-timeout 120
ip nat translation finrst-timeout 300
ip nat translation syn-timeout 120
ip nat translation dns-timeout 300
ip nat translation icmp-timeout 120
ip nat translation max-entries 5000
ip nat inside source list 1 interface
Dialer0 overload
access-list 1 permit 192.168.0.0 0.0.0.255
!
line con 0
password
login
transport input none
stopbits 1
line vty 0 4
password
login
!
scheduler max-task-time 5000
end.
vi ringrazio anticipatamente.
saluti e buona giornata.
pentium
p.s. quando do il comando Router(config)#ip nat inside source static 192.168.0.2 interface Dialer0
mi da invalid detedted sotto ad "ip"...perchè??
tnx..
