Ciao a tutti,
sto cercando di configurare il mio 2610 per internet, ma cosa devo fare per portare l'interfaccia fisica atm0/0 up.
Il led CD è morto mentre il led verde di OK è acceso.
Vorrei sapere solamente se può essere un problema di wic o se devo editare qualche configurazione particolare per l'interfaccia, oltre al no shutdown, naturalmente.........
Qualcuno sa aiutarmi!???
Grazie
Aiuto 2610 + wic adsl
Moderatore: Federico.Lagni
-
juripatrizi
- n00b
- Messaggi: 4
- Iscritto il: ven 11 ago , 2006 5:21 pm
ecco quà
Slot 0:
C2610 1E Mainboard Port adapter, 4 ports
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 2.3
PCB Serial Number : JAD04190ELY (3476906529)
Part Number : 73-2839-13
RMA History : 00
RMA Number : 0-0-0-0
Board Revision : C0
Deviation Number : 0-22418
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 00 91 41 02 03 C1 18 4A 41 44 30 34 31
0x10: 39 30 45 4C 59 20 28 33 34 37 36 39 30 36 35 32
0x20: 39 29 82 49 0B 17 0D 04 00 81 00 00 00 00 42 43
0x30: 30 80 00 00 57 92 FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
WIC Slot 0:
DSL SAR (ADSL)
Hardware Revision : 2.3
Part Number : 73-4771-09
Board Revision : C0
Deviation Number : 0-0
Fab Version : 05
PCB Serial Number : FOC09041YSV
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 00 2E 41 02 03 82 49 12 A3 09 42 43 30
0x10: 80 00 00 00 00 02 05 C1 8B 46 4F 43 30 39 30 34
0x20: 31 59 53 56 03 00 81 00 00 00 00 04 00 FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
WIC Slot 1:
Serial 2T (12in1)
Hardware revision 1.0 Board revision C0
Serial number 19629592 Part number 800-03181-01
Test history 0x0 RMA number 00-00-00
Connector type PCI
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 12 01 00 01 2B 86 18 50 0C 6D 01 00 00 00 00
0x30: 60 00 00 00 00 05 09 00 FF FF FF FF FF FF FF FF
ATM0/0 is down, line protocol is down
Hardware is DSLSAR (with Alcatel ADSL Module)
MTU 4470 bytes, sub MTU 4470, BW 3200 Kbit, DLY 640 usec,
reliability 0/255, txload 1/255, rxload 1/255
Encapsulation ATM, loopback not set
Encapsulation(s): AAL5 AAL2, PVC mode
23 maximum active VCs, 256 VCs per VP, 0 current VCCs
VC Auto Creation Disabled.
VC idle disconnect time: 300 seconds
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/224/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: Per VC Queueing
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
Grazie
Slot 0:
C2610 1E Mainboard Port adapter, 4 ports
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 2.3
PCB Serial Number : JAD04190ELY (3476906529)
Part Number : 73-2839-13
RMA History : 00
RMA Number : 0-0-0-0
Board Revision : C0
Deviation Number : 0-22418
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 00 91 41 02 03 C1 18 4A 41 44 30 34 31
0x10: 39 30 45 4C 59 20 28 33 34 37 36 39 30 36 35 32
0x20: 39 29 82 49 0B 17 0D 04 00 81 00 00 00 00 42 43
0x30: 30 80 00 00 57 92 FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
WIC Slot 0:
DSL SAR (ADSL)
Hardware Revision : 2.3
Part Number : 73-4771-09
Board Revision : C0
Deviation Number : 0-0
Fab Version : 05
PCB Serial Number : FOC09041YSV
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 00 2E 41 02 03 82 49 12 A3 09 42 43 30
0x10: 80 00 00 00 00 02 05 C1 8B 46 4F 43 30 39 30 34
0x20: 31 59 53 56 03 00 81 00 00 00 00 04 00 FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
WIC Slot 1:
Serial 2T (12in1)
Hardware revision 1.0 Board revision C0
Serial number 19629592 Part number 800-03181-01
Test history 0x0 RMA number 00-00-00
Connector type PCI
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 12 01 00 01 2B 86 18 50 0C 6D 01 00 00 00 00
0x30: 60 00 00 00 00 05 09 00 FF FF FF FF FF FF FF FF
ATM0/0 is down, line protocol is down
Hardware is DSLSAR (with Alcatel ADSL Module)
MTU 4470 bytes, sub MTU 4470, BW 3200 Kbit, DLY 640 usec,
reliability 0/255, txload 1/255, rxload 1/255
Encapsulation ATM, loopback not set
Encapsulation(s): AAL5 AAL2, PVC mode
23 maximum active VCs, 256 VCs per VP, 0 current VCCs
VC Auto Creation Disabled.
VC idle disconnect time: 300 seconds
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/224/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: Per VC Queueing
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
Grazie
-
ndiego75
- Cisco pathologically enlightened user
- Messaggi: 202
- Iscritto il: lun 07 nov , 2005 1:57 pm
- Località: Genova
Riporto un post di qualche tempo fa di "The Irish"
Qual è la procedura del buon networker di fronte ad un problema di connettività?
1. Ci sono delle lucine?
2. Se le lucine sembrano comportarsi in modo anomalo?
3. Se se ci sono filtri o splitter, può essere che siano danneggiati?
4. Se se è un network su cavo, può essere che i cavi siano danneggiati o inadatti?
aggiungo io:
5. La wic funziona?
6. Hai fatto controllare la linea dal provider?
Ciao
Qual è la procedura del buon networker di fronte ad un problema di connettività?
1. Ci sono delle lucine?
2. Se le lucine sembrano comportarsi in modo anomalo?
3. Se se ci sono filtri o splitter, può essere che siano danneggiati?
4. Se se è un network su cavo, può essere che i cavi siano danneggiati o inadatti?
aggiungo io:
5. La wic funziona?
6. Hai fatto controllare la linea dal provider?
Ciao
-
juripatrizi
- n00b
- Messaggi: 4
- Iscritto il: ven 11 ago , 2006 5:21 pm
ndiego75 ha scritto:Riporto un post di qualche tempo fa di "The Irish"
Qual è la procedura del buon networker di fronte ad un problema di connettività?
1. Ci sono delle lucine?
2. Se le lucine sembrano comportarsi in modo anomalo?
3. Se se ci sono filtri o splitter, può essere che siano danneggiati?
4. Se se è un network su cavo, può essere che i cavi siano danneggiati o inadatti?
aggiungo io:
5. La wic funziona?
6. Hai fatto controllare la linea dal provider?
Ciao
Si, penso che il problema sia a livello fisico, ma prima di buttare la wic
volevo sapere se, solamente per agganciare la portante, l'atm avesse bisogno di una qualche configurazione.(Cosa che spero fortemente!!! 
)Grazie
-
ndiego75
- Cisco pathologically enlightened user
- Messaggi: 202
- Iscritto il: lun 07 nov , 2005 1:57 pm
- Località: Genova
La portante dovrebbe agganciarsi indipendentemente dalla configurazione a meno che l'inerfaccia non sia in "shut". Possono sorgere dei problemi di sensibilità della scheda se sei lontano dalla centrale oppure se hai il doppino della tratta che è rovinato.
-
juripatrizi
- n00b
- Messaggi: 4
- Iscritto il: ven 11 ago , 2006 5:21 pm
Ragazzi, non so più cosa fare...........
ecco la configurazione.
Current configuration : 1252 bytes
!
version 12.3
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router
!
boot-start-marker
boot system tftp c2600-ik9o3s3-mz.123-15.bin 192.168.1.4
boot-end-marker
!
!
no aaa new-model
ip subnet-zero
ip cef
!
!
!
ip audit po max-events 100
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface ATM0/0
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
dsl enabl hold-queue 224 in
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
!
interface Ethernet0/0
ip address dhcp
ip nat inside
half-duplex
!
interface Serial0/1
no ip address
shutdown
!
interface Serial0/2
no ip address
shutdown
!
interface Dialer0
ip address negotiated
ip nat outside
encapsulation pppe-training-log
dialer pool 1
ppp chap hostname xxxxxxxxxxxxx
ppp chap password 0 xxxxxxxxxxxxx
ppp pap sent-username xxxxxxxxxxxxx password 0 xxxxxxxxxxxxx
!
ip nat inside source list 1 interface Dialer0 overload
ip http server
no ip http secure-server
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
!
!
access-list 1 permit 192.168.1.0 0.0.0.255
!
!
!
dial-peer cor custom
!
!
!
!
!
line con 0
line aux 0
line vty 0 4
login
!
!
end
ecco l'atm:
ATM0/0 is down, line protocol is down
Hardware is DSLSAR (with Alcatel ADSL Module)
MTU 4470 bytes, sub MTU 4470, BW 3200 Kbit, DLY 640 usec,
reliability 0/255, txload 1/255, rxload 1/255
Encapsulation ATM, loopback not set
Encapsulation(s): AAL5 AAL2, PVC mode
23 maximum active VCs, 256 VCs per VP, 0 current VCCs
VC Auto Creation Disabled.
VC idle disconnect time: 300 seconds
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/224/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: Per VC Queueing
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
Grazie
ecco la configurazione.
Current configuration : 1252 bytes
!
version 12.3
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router
!
boot-start-marker
boot system tftp c2600-ik9o3s3-mz.123-15.bin 192.168.1.4
boot-end-marker
!
!
no aaa new-model
ip subnet-zero
ip cef
!
!
!
ip audit po max-events 100
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface ATM0/0
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
dsl enabl hold-queue 224 in
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
!
interface Ethernet0/0
ip address dhcp
ip nat inside
half-duplex
!
interface Serial0/1
no ip address
shutdown
!
interface Serial0/2
no ip address
shutdown
!
interface Dialer0
ip address negotiated
ip nat outside
encapsulation pppe-training-log
dialer pool 1
ppp chap hostname xxxxxxxxxxxxx
ppp chap password 0 xxxxxxxxxxxxx
ppp pap sent-username xxxxxxxxxxxxx password 0 xxxxxxxxxxxxx
!
ip nat inside source list 1 interface Dialer0 overload
ip http server
no ip http secure-server
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
!
!
access-list 1 permit 192.168.1.0 0.0.0.255
!
!
!
dial-peer cor custom
!
!
!
!
!
line con 0
line aux 0
line vty 0 4
login
!
!
end
ecco l'atm:
ATM0/0 is down, line protocol is down
Hardware is DSLSAR (with Alcatel ADSL Module)
MTU 4470 bytes, sub MTU 4470, BW 3200 Kbit, DLY 640 usec,
reliability 0/255, txload 1/255, rxload 1/255
Encapsulation ATM, loopback not set
Encapsulation(s): AAL5 AAL2, PVC mode
23 maximum active VCs, 256 VCs per VP, 0 current VCCs
VC Auto Creation Disabled.
VC idle disconnect time: 300 seconds
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/224/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: Per VC Queueing
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
Grazie
