Ciao a tutti di nuovo.
Qualcuno mi sa dire se è possibile collegare e gestire un modem analogico dalla wic serial1 del cisco 1721 come linea di backup?
Il router ha questa configurazione:
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-SV8Y7-M), Version 12.3(6d), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 15-Oct-04 03:46 by kellythw
Image text-base: 0x80008120, data-base: 0x81440804
ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
cisco uptime is 3 hours, 18 minutes
System returned to ROM by power-on
System restarted at 18:03:48 rome Tue Jan 31 2006
System image file is "flash:cr"
cisco 1721 (MPC860P) processor (revision 0x300) with 59333K/6203K bytes of memory.
Processor board ID FOC075216S9 (3165465805), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial(sync/async) network interface(s)
1 ATM network interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
Grazie a tutti.
