====================================================
Dati configurazione Router Cisco887 Alice Adsl.
====================================================
Mome Router = Cisco887M
username Cos_Bel
enable secret adminblc
!
Ip router: 192.168.111.1
Maschera sottorete: 255.255.255.0
(rilascio ip 192.168.111.2 fino al 253 o 254?).
!
#Questi IP li ho fissi su tre computer:
192.168.111.10
192.168.111.15
192.168.111.20
!
Parametri interfaccia ATM (Linea ADSL)
Protocollo PPPoE
Encapsulation: LLC
VPI:8
VCI:35
Username e Password: aliceadsl
!
DNS primario: mettiamo alice oppure Google?
DNS secondario: mettiamo alice oppure Google?
!
#Wireless Modalità cifratura WPA2-PSK
Nome WiFi= St_BLCnet (Possibilmente nascosto)
Passwod= WiFi= Blc52@Roma.!t
!
# iscrizione al dyndns credo che sia questa:
http://username:[email protected] ... h>&myip=<a>
!
hostname camelt.dyndns.org
!
Nattare la porta 12000 con IP 192.168.111.15
!
# client-identifier [mac address preceduto da 01 esempio: 0100.0129.d1a5.83]
# client-name [nome da dare al dispositivo]
!
# Lista MAC ADDRESS WIFI DA ABILITARE:
client-identifier 019c.04eb.1ead.10
client-name iPhone_Mimmo
client-identifier 0100.f7e4.ce5b.50
client-name iPhone_Lia
client-identifier 0104.f1e4.82f6.e0
client-name iPhone_Manuel
client-identifier 0181.ea91.0dda.4c
client-name iPhone_Sandro
client-identifier 0114.8fc3.3457.d0
client-name iPhone_Luca
client-identifier 0178.ca35.8591.2f
client-name iPhone_Marco
client-identifier 01d7.9e3f.c892.a5
client-name iPhone_Bologna
client-identifier 01bc.2baf.032b.df
client-name iPhone_Contento
client-identifier 01b0.0494.bd52.ef
client-name PlayStation_4
client-identifier 018c.faba.79f6.4a
client-name iPhone_Antonella
client-identifier 0124.ab61.93ca.14
client-name iPhone_Fiorella
-----------------------------------------------------
questo è lo show config:
System Bootstrap, Version 12.4(22r)YB5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2009 by cisco Systems, Inc.
C880 platform with 786432 Kbytes of main memory
Readonly ROMMON initialized
program load complete, entry point: 0x80020000, size: 0x1b32844
Self decompressing the image : ###########################################[OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C880 Software (C880DATA-UNIVERSALK9-M), Version 15.0(1)M7, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Fri 05-Aug-11 02:01 by prod_rel_team
Image text-base: 0x800200E4, data-base: 0x82CB4D98
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Installed image archive
Cisco 887M (MPC8300) processor (revision 1.0) with 708608K/77824K bytes of memory.
Processor board ID FGL1543204S
4 FastEthernet interfaces
1 Gigabit Ethernet interface
1 ISDN Basic Rate interface
1 ATM interface
1 terminal line
1 Virtual Private Network (VPN) Module
1 cisco Embedded AP (s)
256K bytes of non-volatile configuration memory.
126000K bytes of ATA CompactFlash (Read/Write)
Multidrop Termination is already ENABLED
control-plane
^
% Invalid input detected at '^' marker.
Press RETLINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
Apr 24 20:10:15.747: %LINK-5-CHANGED: Interface BRI0, changed state to administratively down
Apr 24 20:10:15.919: %SYS-5-CONFIG_I: Configured from memory by console
Apr 24 20:10:16.715: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C880 Software (C880DATA-UNIVERSALK9-M), Version 15.0(1)M7, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Fri 05-Aug-11 02:01 by prod_rel_team
Apr 24 20:10:16.715: %SNMP-5-COLDSTART: SNMP agent on host yourname is undergoing a cold start
Apr 24 20:10:16.735: %SSH-5-ENABLED: SSH 1.99 has been enabled
Apr 24 20:10:17.735: %LINK-5-CHANGED: Interface ATM0, changed state to administratively down
Apr 24 20:10:18.003: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
Apr 24 20:10:18.043: %LINK-3-UPDOWN: Interface Wlan-GigabitEthernet0, changed state to up
Apr 24 20:10:19.003: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
Apr 24 20:10:19.015: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1, changed state to down
Apr 24 20:10:19.027: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet2, changed state to down
Apr 24 20:10:19.035: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet3, changed state to down
Apr 24 20:10:19.043: %LINEPROTO-5-UPDOWN: Line protocol on Interface Wlan-GigabitEthernet0, changed state to up
Apr 24 20:10:47.067: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up
-----------------------------------------------------------------------
Cisco Configuration Professional (Cisco CP) is installed on this device.
This feature requires the one-time use of the username "cisco" with the
password "cisco". These default credentials have a privilege level of 15.
YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE
PUBLICLY-KNOWN CREDENTIALS
Here are the Cisco IOS commands.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want
to use.
IF YOU DO NOT CHANGE THE PUBLICLY-KNOWN CREDENTIALS, YOU WILL
NOT BE ABLE TO LOG INTO THE DEVICE AGAIN AFTER YOU HAVE LOGGED OFF.
For more information about Cisco CP please follow the instructions in the
QUICK START GUIDE for your router or go to http://www.cisco.com/go/ciscocp
-----------------------------------------------------------------------
User Access Verification
Username: cisco
Password: xxxxx
% Password expiration warning.
-----------------------------------------------------------------------
Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username <myuser> privilege 15 secret 0 <mypassword>
Replace <myuser> and <mypassword> with the username and password you
want to use.
-----------------------------------------------------------------------
yourname#show config
Using 4020 out of 262136 bytes
!
! No configuration change since last restart
! NVRAM config last updated at 19:29:36 UTC Mon Apr 21 2014
!
version 15.0
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname yourname
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
!
no aaa new-model
memory-size iomem 10
!
crypto pki trustpoint TP-self-signed-3989968628
enrollment selfsigned
yourname#show config
Using 4020 out of 262136 bytes
!
! No configuration change since last restart
! NVRAM config last updated at 19:29:36 UTC Mon Apr 21 2014
!
version 15.0
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname yourname
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
!
no aaa new-model
memory-size iomem 10
!
crypto pki trustpoint TP-self-signed-3989968628
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3989968628
revocation-check none
rsakeypair TP-self-signed-3989968628
!
crypto pki certificate chain TP-self-signed-3989968628
certificate self-signed 01 nvram:IOS-Self-Sig#5.cer
ip source-route
!
ip dhcp excluded-address 10.10.10.1
!
ip dhcp pool ccp-pool
import all
network 10.10.10.0 255.255.255.248
default-router 10.10.10.1
lease 0 2
!
ip cef
no ip domain lookup
ip domain name yourdomain.com
no ipv6 cef
!--------------------------------------------------
license udi pid CISCO887MW-GN-E-K9 sn FGL1543204S
!--------------------------------------------------
username cisco privilege 15 one-time secret 5 $1$mLeS$5VAjV/OB/pEK6UtLkRlxy0
!
interface BRI0
no ip address
encapsulation hdlc
shutdown
isdn termination multidrop
!
interface ATM0
no ip address
shutdown
no atm ilmi-keepalive
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface wlan-ap0
description Service module interface to manage the embedded AP
ip unnumbered Vlan1
arp timeout 0
!
interface Wlan-GigabitEthernet0
description Internal switch interface connecting to the embedded AP
!
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
ip address 10.10.10.1 255.255.255.248
ip tcp adjust-mss 1452
!
ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
!
access-list 23 permit 10.10.10.0 0.0.0.7
no cdp run
!
yourname#
!
GRAZIE INFINITAMENTE
